Nortel Modular ICS 7.1, Инструкция по установке

Страница: 347 / 700

Terminals&Sets /
347
N0130943 02 Modular ICS 7.1 Installer Guide
For more information, refer to the Modular ICS 7.1 System
Coordinator Guide .
ATA use Select where the ATA can be used. On site,
Off site
MsgIndicate Select the type of message indicator.
When a message is received, Tone
sends a Message Tone through the
handset and Lamp turns on the Message
Lamp. None , Tone,
Lamp
ATA dvc Select the a device code for the
telephone or terminal attached to your
ATA. This feature enhances ATA
telephone connects from an ATA over
PRI/BRI lines. Telephon
Modem
Intrusion
Protect lvl
Determine the level of access this
telephone will have to allow the user to
break into calls on other telephones in
the system (Meridian 1 MCDN Break-in
feature).
To be able to use Break-in, the Protect lvl
for this telephone must be less than that
of the attendant telephone on the
Meridian.
None , Low,
Medium, High
SM Supervisor Determine if this telephone will be
allowed to monitor Hunt group calls. N , Y
SWCA call
group
Call 1-16:
Add SWCA assignments to this
telephone not associated with a button.
Note: For telephones with memory
buttons, you can add SWCA
assignments under button programming.
N , Y
Setting Description Options