Nortel Modular ICS 7.1, Инструкция по установке

Страница: 446 / 700

446
/ System prgrming
Modular ICS 7.1 Installer Guide N0130943 02
Overview about assigning SWCA codes to telephones
You can either assign SWCA codes as a feature to physical
buttons with indicators on a telephone through Button
programming (Terminals&Sets, User prefernces) or by
assigning them to a memory key at the telephone.
You can also assign SWCA codes to the telephone that are not
connected to a button on the telephone. This is performed
using the
SWCA call group heading under Capabilities for
each telephone record. This type of assignment is particularly
apt for 7000 and 7100 digital phones and to the Digital
Mobility phone. Refer to
Capabilities on page 345.
Non-button SWCA assignments are controlled by feature
codes
≤•fi¤⁄
to
≤•fi‹fl
.
Refer to the SWCA User Card for details about using SWCA
assignments.
Tip -
Software versions previous to MICS 7.0 use the
feature range
≤•fi¤‚
to
≤•fi‹fi
.
Tip -
Users can assign calls to any SWCA code. However,
they can only retrieve calls using codes that are assigned to
their telephones. Auto assign conditions will only assign calls
to codes assigned to the telephone receiving the call.