Nortel Modular ICS 7.1, Инструкция по установке

Страница: 647 / 700

Glossary / 647
N0130943 02 Modular ICS 7.1 Installer Guide
Group Listening:
≤°‚¤
A feature that allows you to have others
in your office hear a caller through your
telephone speaker. The caller hears you
only when you speak into the receiver.
They cannot hear other people in the
office.
You can cancel Group Listen for the
current call. Group Listen is cancelled
automatically when you hang up the
Group Listen call.
H
Handsfree:
A feature you can use to
make calls without using the telephone
receiver.
Full Handsfree
is activated
under
Capabilities
in
Terminals&Sets
programming. When
it is activated, a handsfree/mute button
is automatically assigned to the
telephone.
Handsfree (HF) answerback:
When activated, this feature
automatically turns on the microphone
at a telephone receiving a Voice Call so
that the person receiving the call can
respond without lifting the receiver. It is
activated under
Capabilities
in
Terminals&Sets
programming.
Handsfree/mute button:
See
handsfree.
Hardware:
A section in programming
that shows what equipment has been
installed in the ICS. This section is
accessed by the installer.
headset:
A head-mounted or
ear-mounted telephone receiver that is
used instead of the hand-held receiver.
Headsets are not Norstar components
and must be supplied by the customer.
Held (Line) Reminder: A system
telephone rings and displays the
message
On hold: LINENAM
when an
external call has been placed on hold for
a certain period of time. The
Held Line
Reminder
feature and
Remind delay
are set under
Feature settings
in
Sys
prgrmmng
.
HF Answerback:
See handsfree
answerback.
Hold button:
≥
This button is used to suspend calls so
that the person using the telephone can
perform another task without
disconnecting the caller.
Hook Switch Flash: See Link time.
Host system signaling: (Also
referred to as end-to-end signaling.)
System telephones can access a remote
system or dial a number on an alternate
carrier by means of host feature
activation, such as Link, Pause and Run/
Stop.
Hospitality
The Hospitality features
allow business which use hospitality
telephones, or room-based telephones,
to control access, alarms, and
maintenance duties through the
telephones.
Hotline:
This feature automatically
calls a pre-assigned number when the
telephone receiver is lifted or the
handsfree/mute button is pressed. A
Hotline number can be an internal or
external number. Hotline is assigned
under
Capabilities
in
Terminals&Sets
programming.
Hunt group: The hunt groups feature
allows a group of sets to be called by a
single directory number ensuring that
calls are easily routed to the appropriate
group.
I
I/C: An abbreviation of intercom.
ICS (integrated communication
system):
The central hardware
component in the Norstar system. The
ICS has its own processor and memory,
and provides a physical point of