Nortel Modular ICS 7.1, Инструкция по установке

Страница: 651 / 700

Glossary / 651
N0130943 02 Modular ICS 7.1 Installer Guide
overlay:
See Programming overlay.
overflow:
A setting in
Routing
Service
that allows users to decide
what path an outgoing call will take if all
the lines used in a particular route are in
use when the call is made.
Overlap dialing:
This feature allows
you to turn off enbloc dialing for ETSI
PRI lines (profile 2, only) to enable the
telephone submit a series of numbers for
a PRI pool, then to receive a dial tone
from the PRI line before the final call
numbers are dialed.
Overrides: One component of a
restriction filter. Overrides are numbers
you can dial even if they are forbidden
by a more general restriction. See
Restrictions.
P
Page:
≤fl‚
A feature you can use to make
announcements over the Norstar
system. You can make page
announcements over the telephone
speakers and/or external speakers.
Page Time out:
A setting that
controls how long a Page
Announcement can last. It can be
assigned under
Feature settings
in
Sys prgrmmng
.
Page zone:
An area in the office that
receives internal page announcements
independently of the rest of the office.
Each page zone is identified by a
number. Telephones are assigned to
page zones under
Capabilities
in
Terminals&Sets
programming.
Park prefix: See Call park prefix.
Park timeout: The time before an
unanswered parked call is routed back to
the telephone that parked it.
Park
timeout
is configured under
Feature
settings
in
Sys prgrmmng
.
Password:
A password is a specific
sequence of digits that you enter to gain
access to Norstar programming, to
override dialing restrictions, or to use
remote access with DISA.
Passwords:
A programming section
that allows you to assign or change COS
passwords, Call log passwords, or any
of the programming passwords. Under
Passwords
programming, you can only
modify the passwords for your level of
programming.
Pause:
≤‡°
A feature that enters a 1.5-second delay
in a dialing sequence on an external line.
This is often required for signaling
remote devices, such as answering
machines, or when reaching through to
PBX features or host systems. The
Pause symbol
(
›
) uses one of the 24
spaces in a dialing sequence. For pulse
dialing,
•
inserts a 1.5 second pause
into the dialing sequence.
PBX:
private branch exchange.
Pickup Group:
≤‡fi
A telephone can be placed into one of
nine call pickup groups. A call ringing at
a telephone within a pickup group can
be picked up at any other telephone
within the same pickup group. A
telephone is assigned to a pickup group
under
Capabilities
in
Terminals&Sets
programming.
Pool:
See Line pool.
portable telephone:
See Digital
Mobility phones. portable telephone
Pre-dial:
A feature that allows you to
enter a number and check it on your
telephone display before it is actually
dialed. If the number is incorrect, you
can edit it. The number is dialed only
when you pick up the receiver or select
a line.
Primary Rate Interface (PRI): An
ISDN interface which uses