manualshive.com logo in svg

Nortel Modular ICS 7.1, Инструкция по установке, Страница: 232 / 700

Поделиться
Скачать
Nortel Modular ICS 7.1 Скачать руководство пользователя страница 232

232

 / Installing the cartridges

Modular ICS 7.1 Installer Guide

N0130943  02

•

LS/DS Global Analog Trunk Cartridges and CI Global 
Analog Trunk Cartridges both support loop start external 
lines.

•

The Digital trunk Interface (DTI) supports both digital T1 
and PRI lines. The DTI card can be configured to support 
ISDN PRI. Systems running Profile 1 or 4 can support 1 
off-core DTI module.

•

The Loop Start Trunk Cartridge supports loop start 
external lines.

•

The E&M Trunk Cartridge supports E&M lines and 
provides direct inward system access (DISA).

•

The DID Trunk Cartridge supports direct inward dialing 
lines.

•

The BRI-ST card supports ISDN BRI S or T reference 
point loops.

•

The BRI-U2 and BRI-U4 cards support two or four ISDN 
BRI U reference point loops, respectively.

•

The Analog Extension Module (AEM), also known as an 
Analog Station Module (ASM), connects up to eight 
standard analog devices through eight ports connected to 
the CCU through a fibre cable link. 

Содержание Modular ICS 7.1





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов