Nortel Modular ICS 7.1, Инструкция по установке

Страница: 364 / 700

364
/ Lines
Modular ICS 7.1 Installer Guide N0130943 02
Line type
This setting specifies how the line is to be used in relation to
other lines in the system.
Press
CHANGE
to select the setting:
Public
,
Private to:
, or
Pool
(A to O or PRI-A to PRI-D).
• A Public line can be accessed by more than one telephone.
• A Private line can be assigned only to one telephone and
the prime telephone for that line. Use
CHANGE
and the
dialpad to enter the internal number of the telephone.
• Pool assigns the line to one of the line pools. If a line is
assigned to a line pool, but is not assigned to any
telephone, that line is available only for outgoing calls (for
example, PRI lines).
Enable Trunk Cartridges
If you disabled any Trunk Cartridges to perform
programming, enable them now using
Module status
under
Maintenance
or your
system will not function properly. See Module
status on page 537 for information about
enabling Trunk Cartridges in Module status.
Tips -
Line pools must never contain a mixture of loop
start lines and E&M lines. All E&M lines in a given line pool
should go to the same location.
Try to avoid putting unsupervised loopstart lines in a line pool.
These lines can become hung, especially when a remote user
uses the line pool to make an external call.