manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-R-R00CPU, Руководство пользователя

Продукт Mitsubishi Electric MELSEC iQ-R-R00CPU - это высокотехнологичный контроллер, обеспечивающий эффективное управление производственными процессами. Для получения подробной информации и инструкции по эксплуатации, вы можете бесплатно скачать пользовательское руководство с сайта manualshive.com. Узнайте больше о возможностях этого продукта прямо сейчас!

Поделиться
Скачать
background image

958

APPX
Appendix 13  How to Use CPU Module Logging Configuration Tool

*1 The following capacity values are output to 

 based on the model.

Example: R08CPU, R08ENCPU, R08PCPU, R08SFCPU: 

 = 08

(16)

Device comment 
name length

The length of the device comment name specified in the setting is output.

2

(17)

Device comment 
name

The device comment name specified in the setting is output in Unicode.
When "Output each program device comment" is selected, the comment with the specified comment 
number in the device comment file for each program is output only for the local device.
When the device comment file for each program or the comment of the corresponding program does 
not exist, the comment of the device comment file is output.

0 to 2048

(18)

Record start flag, 
record end flag

The flags for identifying the start and end of the record are output. The FFFFH is output for record start 
while the FFFEH is output for record end as the fixed flag.

2

(19)

Record data length

The total size of (20) Day and time data to (28) Last data is output.

2

(20)

Date data

The Day and time data is output.

8

(21)

Data collection 
interval

The time interval from the previous collection time to the current collection time is output. (Unit: 

s, 

Display range: 1 to 100000000000 (When it exceeds the max value, it returns to "1" and incrementing 
runs again.)) After logging collection is started, 0 is stored at the first collection.

8

(22)

Step No.

The step No. executed with the engineering tool at the timing in which data was collected is output. With 
the collection condition "Each scanning cycle" specified, the resulting output is the step No. at the time 
of execution of END instruction in the last executed program on the scan. With the collection condition 
"Interrupt occurrence" specified, the resulting output is the step No. at the time of execution of IRET 
instruction in the interrupt program. If the system operation (such as system interrupt) is running during 
collection interval and collection timing or the FB program is in running, "0" is output.

4

(23)

Program No.

The program No. (FB File No) executed on the engineering tool at the timing in which data was 
collected is output. With the collection condition "Each scanning cycle" specified, the resulting output is 
the program number of the last executed program in the scan. If system operation (such as system 
interrupt) is running at collection interval and collection timing, "0" is output.

2

(24)

Program name 
length

The name length of a program that is executed at the time interval and timing in which data was 
collected is output. If the same program number or program name has already been in the file, "0" is 
output.

2

(25)

Program name

The program name (no extension) that is executed at the time interval and timing in which data was 
collected is output in Unicode. With the collection condition "Each scanning cycle" specified, the 
resulting output is the program name of the last executed program in the scan. If system operation 
(such as system interrupt) is running at collection interval and collection timing, "* SYSTEM" is output.

0 to 200

(26)

Index

The index number ranging from 1 to 4294967295 of data, which was collected by the data logging 
function, is output. When it exceeds the max value, it returns to "1" and incrementing runs again. If 
missing occurs in processing data, index will be reassigned from 1 again.

4

(27)

Trigger occurrence 
flag

The trigger occurrence information is output.

b0 1: A trigger has occurred.

0: No trigger has occurred.

2

(28)

Data

Data collected by the data logging function is output corresponding to (13) Data length and (10) Data 
type.

• When bits are specified: bit On = 1 and bit Off = 0 are output.
• When word type (signed/unsigned) or double-word type (signed/unsigned) is specified: the data 

values are output in the specified unit.

• When single-precision real number or double-precision real number is specified: data value is output 

in the specified unit. (

 Page 959 Numerical value range for each output type)

• When character string type is specified: the character string with the specified size is output. If the 

character string terminator "0" exists in the middle of data, NULL is generated on from said point 
onward until the terminator of the specified size.

• When numeric string type is specified: the data value with the specified size is output.
• When time is specified: T#-24d20h31m23s648ms to T#24d20h31m23s647ms is output.

• Bit: 2
• Word (signed/

unsigned): 2

• Double word 

(signed/
unsigned): 4

• Single-precision 

real number: 4

• Double-precision 

real number: 8

• String/numeric 

string: 1 to 256

• Time:  4

(29)

Device code

The device code of the device/label specified in the setting is output.

16

(30)

Program name 
length

The length of the program name specified in the setting is output. (When a global device or global label 
is specified, "0" is output.)

2

(31)

Program name

The specified program name (no extension) is output in Unicode. (When a global device or global label 
is specified, the program name is not output.)

0 to 120

No.

Item

Description

Size (byte)

b15

b0

to

Year: Last 2 digits of the year, 
Month: 1 to 12
Day: 1 to 31, Time: 0 to 23

Minute: 0 to 59, Second: 0 to 59

Millisecond: 0 to 999

Year

Day

Minute

Month

Time

Second

Millisecond

b0

Содержание MELSEC iQ-R-R00CPU





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-R-R00CPU

Hamworthy AM1 Installation, Commissioning, Operation & Service Instructions preview
AM1
Бренд: Hamworthy Страницы: 10
VAT 168 Series Installation, Operating, & Maintenance Instructions preview
168 Series
Бренд: VAT Страницы: 29
Balboa Instruments Dolphin Manual preview
Dolphin
Бренд: Balboa Instruments Страницы: 19
IBM 3746-900 Installation Manual preview
3746-900
Бренд: IBM Страницы: 276
IBM 4769 Installation Manual preview
4769
Бренд: IBM Страницы: 32
IBM 3745 Series Connection And Integration Manual preview
3745 Series
Бренд: IBM Страницы: 157
olympia electronics GR-6500 Quick Installation Manual preview
GR-6500
Бренд: olympia electronics Страницы: 10
PACH & COMPANY AeGIS 4000 Quick Installation And Programming Manual preview
AeGIS 4000
Бренд: PACH & COMPANY Страницы: 4
Paradox Magellan REM2 Reference And Installation preview
Magellan REM2
Бренд: Paradox Страницы: 2
UNICORECOMM UM4B0 User Manual preview
UM4B0
Бренд: UNICORECOMM Страницы: 32
UNICORECOMM UM220-IV M0 Additional Instructions For Installation And Operation preview
UM220-IV M0
Бренд: UNICORECOMM Страницы: 7
UNICORECOMM UM220-INS NF Installation And Operation User Manual preview
UM220-INS NF
Бренд: UNICORECOMM Страницы: 26
UNICORECOMM UM220-INS NF User Manual preview
UM220-INS NF
Бренд: UNICORECOMM Страницы: 25
Quinny Buzz 01638 User Manual preview
Buzz 01638
Бренд: Quinny Страницы: 21
Haes ELAN HS-5100 User Manual preview
ELAN HS-5100
Бренд: Haes Страницы: 42
Altronix Trove T1VK3F4 Installation Manual preview
Trove T1VK3F4
Бренд: Altronix Страницы: 8
nvent JBS-100-EC Installation Instructions Manual preview
JBS-100-EC
Бренд: nvent Страницы: 6
Smart Vision BTM-1000 Product Data Sheet preview
BTM-1000
Бренд: Smart Vision Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды