Maple Systems Silver HMI504T, Инструкция по установке и эксплуатации

Страница: 9 / 272

List of Fea tures
The next chapter will guide you through the creation of your first project. Before you proceed, you may wish to read this
brief list of some of the features offered in the Silver Series OIT.
Icon Name Description
Bit Lamp Creates a graphics object to reflect the current status of a PLC bit.
Word Lamp Creates a graphics object to reflect the current state of a multi-state PLC data register.
Set Bit
Creates a touch screen graphics object that represents a two-state switch. When pressed it
sets/resets a PLC bit.
Set Word
Creates a touch screen graphics object that represents a multi-state switch. When pressed it
can place a constant value in a PLC register or jog the value.
Toggle Switch
Creates a touch screen graphics object that represents a two-state switch changing state
(picture) based upon a PLC bit. When pressed, it can control another PLC bit.
Multi-State
Switch Creates a multi-state touch screen graphics object that changes state (picture) according to the
value in a PLC data register. When pressed, it sends a value(s) to another PLC register.
Function Key Creates a touch screen graphics object, which displays a window or edits a PLC register.
Numeric Input
Displays a number stored in a PLC register. The number can be changed using a numeric
keypad.
Numeric Data Displays a number stored in a PLC register
ASCII Input
Displays ASCII characters stored in a PLC register. Characters can be changed using an
alphanumeric keypad.
ASCII Data Displays ASCII characters stored in a PLC register
Moving Shapes
Creates a multi-state graphics object, which changes state (picture) and position on the screen
according to a value in a PLC register.
Animation
Creates a multi-state graphics object, which changes state (picture) on the screen according to a
value in a PLC register. The positions on the screen are predefined.
Indirect Window
Configures the OIT to monitor PLC data registers or coils to display for a specific window popup
by a PLC word address
Direct Window Displays a Window based on a bit in a PLC Register
Alarm Displays Creates alarms to display alarms sent from the Alarm Scan Object
Trend Displays
Creates a trend graph. Samples data in a single or multiple 16-bit PLC register and plots the
data on a time graph
Bar Graph
Displays
Creates a bar graph with alarm monitoring
1010-1001a, Rev 02
Introduction 5