Maple Systems Silver HMI504T, Инструкция по установке и эксплуатации

Страница: 59 / 272

you are trying to overlap objects that must be the same size. To better illustrate, refer to the left side of Window_12
of the sample project:
4
The make same width command
1. Select the objects you wish to make the same width. For this example, select the left and
center rectangle objects of Window_12
2. From the
Edit
menu, click
Make Same Size
, then
Width
or click the appropriate icon from
the Manager toolbar.
š
EasyBuilder always uses the width of the last object that was created as the basis for
the width. In this example, the left rectangle was created first, then the middle
rectangle, finally the right rectangle. See what happens when the
make same width
command is applied to the center and right rectangles.
1010-1001a, Rev 02
Using EZware-500 55