Maple Systems Silver HMI504T, Инструкция по установке и эксплуатации

Страница: 130 / 272

then select from the available patterns, and click
OK
to exit the
Pattern Style
dialog box. In
the Attributes dialog box, select the Pattern color.
4. In the Frame section, click the pull-down arrow of the Color box and select a color. Click
OK
in the Color dialog box to go back to the Attributes dialog box.
5. Click on the line thickness that you want to use.
6. Move the mouse cursor over to the work area of EasyBuilder onto the window that you are
currently editing. The mouse cursor has changed from an arrow to a crosshair cursor.
7. Click to mark a corner of the rectangle. Move the mouse to where the opposite corner of the
rectangle should be. Click the mouse cursor again to mark the corner of the rectangle. The
rectangle object is formed and displayed on the window screen with small white square
blocks around the perimeter of the rectangle.
8. To continue creating more rectangles repeat the last step. To move the rectangle just created,
click on the
Select option from the Edit menu or click the Select icon in the Draw toolbar.
Move the rectangle to the preferred location.
9. To change any of the attributes, double-click on the rectangle to display the
Rectangle
Object’s Attribute dialog box.
The El lipse/Cir cle Tool
The ellipse tool is used to create ellipses or circles. Each ellipse created has four parameters associated with it: size,
thickness, color, and filled.
4
To create an ellipse
1. From the
Draw
menu, click
Ellipse/Circle
or click the
Ellipse/Circle
icon in the Draw
toolbar. The Attributes dialog box appears.
2. If the interior of the ellipse is to be filled with a color, check the Filled box. Two additional
settings appear.
3. If you want to fill the ellipse with a solid color, then select a color for the Interior box. Click
Pattern Style to display the Pattern Style dialog box. Select the upper left-most pattern for a
solid color. If you want to use a pattern for the filled section of the ellipse, then select from
the available patterns, and click
OK to exit the Pattern Style dialog box. In the Attributes
dialog box, select the Pattern color.
4. In the Frame section, click the pull-down arrow of the
Color
box and select a color. Click
OK in the Color dialog box to go back to the Attributes dialog box.
5. Click on the line thickness that you want to use.
6. Move the mouse cursor over to the work area of EasyBuilder onto the window that you are
currently editing. The mouse cursor has changed from an arrow to a crosshair cursor.
7. Click to mark a corner of the ellipse. Move the mouse to where the opposite corner of the
ellipse should be. Click the mouse cursor again to mark the ellipse. The ellipse object is
formed and displayed on the window screen with small white square blocks around the
perimeter of the ellipse.
8. To continue creating more ellipses repeat the last step. To move the ellipse just created, click
on the
Select option from the Edit menu or click the Select icon in the Draw toolbar. Move
the ellipse to the preferred location.
9. To change any of the attributes, double-click on the ellipse to display the Ellipse Object’s
Attribute dialog box.
The Arc Tool
The arc tool is used to create arcs. Each arc created has three parameters associated with it: size, thickness, and
color.
4
To create an arc
1. From the Draw menu, click Arc or click the Arc icon in the Draw toolbar. The Attributes
dialog box appears.
2. In the Frame section, click the pull-down arrow of the Color box and select a color. Click
OK in the Color dialog box to go back to the Attributes dialog box.
3. Click on the line thickness that you want to use.
1010-1001a, Rev 02
126 Sil ver Se ries In stal la tion & Op er a tion Man ual