Maple Systems Silver HMI504T, Инструкция по установке и эксплуатации

Страница: 124 / 272

Window menu, select Open Window . In the Open Window dialog box, click the Task button… dialog box. The
Window Setting box appears:
The only parameters that apply to the Task Bar are the Width and Height settings. The default setting for the
Width parameter is 100 but you can select from a range of 10-200. The default setting for the Height parameter is
30 but you can select from a range of 10-100.
Click on the Window… button to change settings for the Window Bar key. The Fast Selection key can be modified
by clicking the Screen… button. The Window Attribute dialog box appears. You can change the shape used for
the two hot keys or the label that identifies them. You can also change the speed at which these keys display the
Window Bar and the Fast Selection Window.
Cre ating a Mes sage Board
You may have an application for an OIT in which the OIT operator must be able to leave messages for someone else
to read. The message board feature creates a popup window that can be displayed on the OIT for such a purpose.
Once displayed, the OIT operator ‘draws’ on the touch screen to write messages. The messages remain on the
message board until a touch screen command is issued to clear the message board or the OIT is reset. One message
board may be created per project and it must be created from a popup window. You can only call up the message
board using the Direct Window Object. The message board popup window can contain any graphics objects and the
OIT operator can write over any graphics objects that appear on the window.
4
To create a Message Board
1. Create a Base Window that is partially sized, (to be used as a popup window).
1010-1001a, Rev 02
120 Sil ver Se ries In stal la tion & Op er a tion Man ual