Maple Systems Silver HMI504T, Инструкция по установке и эксплуатации

Страница: 25 / 272

7. Click
button1
in the Shape library box.
8. Scroll through the selections to selection 23. Click the shape, then click OK . The shape
should appear in the Shape tab.
9. Click the Label tab.
10. Click the pull down box from the Color box. The Color dialog box appears.
11. Click on the black color box, then click
OK . The color box should reflect what you have
chosen.
12. Select
16
in the Font box.
13. Select Left in the Align box.
14. Type
ON
in the Content box.
15. Click the Use Label box.
16. Click
OK
.
17. On the main screen of EasyBuilder, you will see a white square outline that is attached to your
cursor in the work area. This represents the function key just created. Center the square
somewhere on the bottom left portion of the work area and then click. The function key
should appear.
18. Double-click on the function key. The Function Key Object’s Attribute box appears.
19. Click on the
Profile tab.
20. Enter 47 for the X position. Enter 168 for the Y position.
21. Enter 62 for the Width. Enter 49 for the Height.
22. Click OK .
23. On the main screen of EasyBuilder, you should see the function key that you just created
move and/or change size. This function key is used to display Window #11.
4
To create a second function key on Window#10
1. We could create the second function key by repeating the steps for the first function key.
Instead, however, we will take advantage of the first function key and copy it.
2. Click the first function key to highlight it.
3. From the Edit menu, click
Copy
.
4. From the Edit menu, click Paste . A copy of the function key appears in the upper left corner
of the work area. Deselect the function key by clicking on any blank space in the work area.
5. Double-click on the second function key. The Function Key’s Object Attribute dialog box
appears.
6. In the General tab section, change the Description to
Off Button
.
7. Click on Change Window . Enter 10 for Window number
8. Click on the
Label
tab. Type
OFF
in the Content box.
9. Click on the Profile tab.
10. Enter
196
for the X position. Enter
168
for the Y position.
11. Click OK .
12. On the main screen of EasyBuilder, you should see the second function key that you just
created move to the lower right hand side of the work area. This function key is used to close
Window #11.
1010-1001a, Rev 02
Cre ating Your First Project 21