IBM 7383, Инструкция по установке и обслуживанию

Страница: 401 / 488

Table 38. DSA messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
If an action step is preceded by “(Trained technician only)”, that step must be performed only by a trained
technician.
v Go to the IBM support website at http://www.ibm.com/supportportal to check for technical information, hints,
tips, and new device drivers or to submit a request for information.
Message
number
Component Test State Description Action
201-802-xxx Memory Memory Test Aborted Test canceled: the
end address in the
E820 function is
less than 16 MB.
1. Turn off and restart the system.
2. Run the test again.
3. Make sure that all DIMMs are
enabled in the Setup utility.
4. Make sure that the server firmware is
at the latest level. The installed
firmware level is shown in the DSA
event log in the Firmware/VPD
section for this component.
5. Run the test again.
6. If the failure remains, go to the IBM
website for more troubleshooting
information.
201-803-xxx Memory Memory Test Aborted Test canceled:
could not enable
the processor
cache.
1.
Turn off and restart the system.
2.
Run the test again.
3.
Make sure that the server firmware is
at the latest level. The installed
firmware level is shown in the DSA
event log in the Firmware/VPD
section for this component.
4. Run the test again.
5. If the failure remains, go to the IBM
website for more troubleshooting
information.
201-804-xxx Memory Memory Test Aborted Test canceled: the
memory controller
buffer request
failed.
1.
Turn off and restart the system.
2.
Run the test again.
3.
Make sure that the server firmware is
at the latest level. The installed
firmware level is shown in the DSA
event log in the Firmware/VPD
section for this component.
4. Run the test again.
5. If the failure remains, go to the IBM
website for more troubleshooting
information.
Appendix B. DSA messages
383