IBM 7383 Скачать руководство пользователя страница 197 | Manualshive

Страница: 197 / 488

IBM 7383 Скачать руководство пользователя страница 197

To order a structural part, complete the following steps:

Note:

Changes are made periodically to the IBM website. The actual procedure

might vary slightly from what is described in this document.

1.

Go to http://www.ibm.com.

2.

From the

Products

menu, select

Upgrades, accessories & parts

.

3.

Click

Obtain maintenance parts

; then, follow the instructions to order the part

from the retail store.

If you need help with your order, call the toll-free number that is listed on the
retail parts page, or contact your local IBM representative for assistance.

Power cords

For your safety, a power cord with a grounded attachment plug is provided to use
with this product. To avoid electrical shock, always use the power cord and plug
with a properly grounded outlet.

IBM power cords used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).

For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified
cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord,
a maximum of 15 feet in length and a parallel blade, grounding-type attachment
plug rated 15 amperes, 125 volts.

For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and
CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a tandem blade,
grounding-type attachment plug rated 15 amperes, 250 volts.

For units intended to be operated at 230 volts (outside the U.S.): Use a cord set
with a grounding-type attachment plug. The cord set should have the appropriate
safety approvals for the country in which the equipment will be installed.

Power cords for a specific country or region are usually available only in that
country or region.

Power cord part number

Used in these countries and regions

39M5206

China

39M5102

Australia, Fiji, Kiribati, Nauru, New Zealand, Papua New Guinea

Chapter 5. Parts listing, IBM System x3500 M4 Type 7383

179

«
...
195
196
197
198
199
...
»

Содержание 7383









































































































































































































































































































































































































































































































Отзывы:

Нет отзывов