Table 39. IMM error messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
If an action step is preceded by “(Trained technician only)”, that step must be performed only by a trained
technician.
806f0a0c-2001ffff
806f0a0c-2002ffff
806f0a0c-2003ffff
806f0a0c-2004ffff
806f0a0c-2005ffff
806f0a0c-2006ffff
806f0a0c-2007ffff
806f0a0c-2008ffff
806f0a0c-2009ffff
806f0a0c-200affff
806f0a0c-200bffff
806f0a0c-200cffff
806f0a0c-200dffff
806f0a0c-200effff
806f0a0c-200fffff
806f0a0c-2010ffff
806f0a0c-2011ffff
806f0a0c-2012ffff
806f0a0c-2013ffff
806f0a0c-2014ffff
806f0a0c-2015ffff
806f0a0c-2016ffff
806f0a0c-2017ffff
806f0a0c-2018ffff
An
Over-Temperature
condition has been
detected on the
DIMM
n
Status. (
n
=
DIMM number)
Error
An
over-temperature
condition has
occurred for DIMM
n
. (
n
= DIMM
number)
1.
Make sure that the fans are
operating, that there are no
obstructions to the airflow, that the
air baffles are in place and correctly
installed, and that the server cover
is installed and completely closed.
2.
Make sure that ambient
temperature is within the
specifications.
3.
If a fan has failed, complete the
action for a fan failure.
4.
Replace DIMM
n
.
(
n
= DIMM number)
800b010c-2581ffff
Backup Memory
redundancy lost has
asserted.
Error
Redundancy has
been lost.
1.
Check the system-event log for
DIMM failure events (uncorrectable
or PFA) and correct the failures.
2.
Re-enable mirrored mode in the
Setup utility.
800b030c-2581ffff
Backup Memory
sufficient resources
from redundancy
degraded has
asserted.
Warning There is no
redundancy. The
state has been
transitioned from
redundancy to
sufficient resources.
1.
Check the system-event log for
DIMM failure events (uncorrectable
or PFA) and correct the failures.
2.
Re-enable mirrored mode in the
Setup utility.
800b050c-2581ffff
Backup Memory
insufficient resources
has asserted.
Error
There is no
redundancy and
insufficient to
continue operation.
1.
Check the system-event log for
DIMM failure events (uncorrectable
or PFA) and correct the failures.
2.
Re-enable mirrored mode in the
Setup utility.
Storage messages
Appendix C. Integrated management module II (IMM2) error messages
425
Содержание 7383
