IBM 7383, Инструкция по установке и обслуживанию, Страница: 69 / 488

The following notes describe the types of drives that the server supports and other
information that you must consider when installing a drive:
v
Make sure that you have all the cables and other equipment that is specified in
the documentation that comes with the drive.
v
Check the instructions that come with the drive to see whether you have to set
any switches or jumpers on the drive. If you are installing a SAS or SATA
device, be sure to set the SAS or SATA ID for that device.
v
Optional external tape drives and DVD-ROM drives are examples of
removable-media drives. You can install removable-media drives only in bays 1
and 2 on models with eight 3.5-inch, eight, sixteen, twenty-four, and thirty-two
2.5-inch hard disk drives.
v
The electromagnetic interference (EMI) integrity and cooling of the server are
protected by having all bays and PCI slots covered or occupied. When you
install a drive or PCI adapter, save the EMC shield and filler panel from the bay
or the PCI adapter slot cover in the event that you later remove the drive or
adapter.
v
For a complete list of supported options for the server, see http://
www.ibm.com/systems/info/x86servers/serverproven/compat/us.
Figure 23. Server with eight 2.5-inch hard disk drives and eight 3.5-inch hard disk drives
Chapter 2. Installing optional devices
51