IBM 7383 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 488

IBM 7383 Скачать руководство пользователя страница 62

Procedure

1.

Touch the static-protective package that contains the simple-swap fan to any
unpainted metal surface on the server; then, remove the fan from the package.

2.

Unlock and remove the left-side cover (see “Removing the left-side cover” on
page 39).

3.

Open the fan cage cover.

4.

Perform the following steps only if you want to install the simple swap fan in
the Fan 2 compartment:

a.

Unfasten and open the release lever (see “Removing the fan cage assembly”
on page 304).

b.

Press and release the clip on the fan filler to remove the fan filler from the
server.

c.

Close and fasten the release lever.

5.

Open the fan-locking handle on the replacement fan.

6.

Insert the fan into the socket and close the handle to the locked position.

44

System x3500 M4 Type 7383: Installation and Service Guide

«
...
60
61
62
63
64
...
»

Содержание 7383









































































































































































































































































































































































































































































































Отзывы:

Нет отзывов