IBM 7383, Инструкция по установке и обслуживанию, Страница: 405 / 488

Table 38. DSA messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
If an action step is preceded by “(Trained technician only)”, that step must be performed only by a trained
technician.
v Go to the IBM support website at http://www.ibm.com/supportportal to check for technical information, hints,
tips, and new device drivers or to submit a request for information.
Message
number
Component Test State Description Action
202-802-xxx Memory Memory
Stress Test Failed General error:
memory size is
insufficient to run
the test.
1. Make sure that all memory is
enabled by checking the Available
System Memory in the Resource
Utilization section of the DSA event
log. If necessary, enable all memory
in the Setup utility.
2. Make sure that the DSA code is at
the latest level.
3. Run the test again.
4. Run the standard memory test to
validate all memory.
5. If the failure remains, go to the IBM
website for more troubleshooting
information.
202-901-xxx Memory Memory
Stress Test Failed Test failure.
1.
Run the standard memory test to
validate all memory.
2. Make sure that the DSA code is at
the latest level.
3. Turn off the system and disconnect it
from power.
4. Reseat the DIMMs.
5. Reconnect the system to power and
turn on the system.
6. Run the test again.
7. Run the standard memory test to
validate all memory.
8.
If the failure remains, go to the IBM
website for more troubleshooting
information.
Appendix B. DSA messages
387