IBM 7383, Инструкция по установке и обслуживанию

Страница: 32 / 488

v
Redundant Ethernet capabilities with failover support
v
Redundant hot-swap power supplies and redundant hot-swap fans
v
Redundant network interface card (NIC) support
v
Remind button to temporarily turn off the system-error LED
v
Remote system problem-determination support
v
ROM-based diagnostics
v
ROM checksums
v Serial Presence Detection (SPD) on memory, VPD on system board, power
supply, and hard disk drive or solid state drive backplanes, microprocessor and
memory expansion tray, and Ethernet adapters
v Single-DIMM isolation of excessive correctable error or multi-bit error by the
Unified Extensible Firmware Interface (UEFI)
v
Solid-state drives
v
Standby voltage for systems-management features and monitoring
v
Startup (boot) from LAN through remote initial program load (RIPL) or dynamic
host configuration protocol/boot protocol (DHCP/BOOTP)
v
System auto-configuring from the configuration menu
v
System-error logging (POST and IMM)
v
Systems-management monitoring through the Inter-Integrated Circuit (I2C)
protocol bus
v
Uncorrectable error (UE) detection
v
Upgradeable POST, Unified Extensible Firmware Interface (UEFI), diagnostics,
IMM firmware, and read-only memory (ROM) resident code, locally or over the
LAN
v
Vital product data (VPD) on microprocessors, system board, power supplies, and
SAS/SATA (hot-swap hard disk drive or solid state drive) backplane
v
Wake on LAN capability
IBM Systems Director
IBM Systems Director is a platform-management foundation that streamlines the
way you manage physical and virtual systems in a heterogeneous environment. By
using industry standards, IBM Systems Director supports multiple operating
systems and virtualization technologies in IBM and non-IBM x86 platforms.
Through a single user interface, IBM Systems Director provides consistent views
for viewing managed systems, determining how these systems relate to one other,
and identifying their statuses, helping to correlate technical resources with business
needs. A set of common tasks that are included with IBM Systems Director
provides many of the core capabilities that are required for basic management,
which means instant out-of-the-box business value. The common tasks include
discovery, inventory, configuration, system health, monitoring, updates, event
notification, automation for managed systems, hardware log, power, and light
path.
The IBM Systems Director web and command-line interfaces provide a consistent
interface that is focused on driving these common tasks and capabilities:
v
Discovering, navigating, and visualizing systems on the network with the
detailed inventory and relationships to the other network resources
v
Notifying users of problems that occur on systems and the ability to isolate the
source of the problem
v
Notifying users when systems need updates and distributing and installing
updates on a schedule
v
Analyzing real-time data for systems and setting critical thresholds that notify
the administrator of emerging problems
14
System x3500 M4 Type 7383: Installation and Service Guide