IBM 7383, Инструкция по установке и обслуживанию

Страница: 249 / 488

Installing a DVD drive
Use this information to install a DVD drive.
Before you begin
If you are replacing a drive, make sure that:
v
You have all the cables and other equipment that are specified in the
documentation that comes with the new drive.
v You have checked the instructions that come with the new drive to determine
whether you must set any switches or jumpers in the drive.
v
You have removed the blue optical drive rails from the side of the old drive and
have them available for installation on the new drive.
Note: If you are installing a drive that contains a laser, observe the following
safety precautions.
Statement 3
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v Do not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable parts
inside the device.
v
Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode.
Note the following. Laser radiation when open. Do not stare into the beam,
do not view directly with optical instruments, and avoid direct exposure to
the beam.
Chapter 6. Removing and replacing components
231