IBM 7383, Инструкция по установке и обслуживанию, Страница: 463 / 488

Table 39. IMM error messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
If an action step is preceded by “(Trained technician only)”, that step must be performed only by a trained
technician.
40000017-00000000 ENET[0]
IP-Cfg:HstName=%1,
IP@%2, NetMsk=%3,
GW@=%4.(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 =
CIM_StaticIPSettingData.IPv4Address;
%3 =
CIM_StaticIPSettingData.SubnetMask;
%4 =
CIM_StaticIPSettingData.DefaultGatewayAddress) Info An IMM IP
address and
configuration have
been assigned
using client data. No action; information only.
40000018-00000000 LAN: Ethernet[0]
interface is no longer
active. Info The IMM Ethernet
interface has been
disabled. No action; information only.
40000019-00000000 LAN: Ethernet[0]
interface is now
active. Info The IMM Ethernet
interface has been
enabled. No action; information only.
4000001a-00000000 DHCP setting
changed to by user
%1. (%1 = user ID) Info A user has changed
the DHCP mode. No action; information only.
4000001b-00000000 IMM: Configuration
%1 restored from a
configuration file by
user %2.(%1 =
CIM_ConfigurationData.ConfigurationName;
%2 = user ID) Info A user has restored
the IMM
configuration by
importing a
configuration file. No action; information only.
4000001c-00000000 Watchdog %1 Screen
Capture Occurred.
(%1 = OS Watchdog
or Loader Watchdog) Error An
operating-system
error has occurred,
and the screen
capture was
successful.
1. Reconfigure the watchdog timer to
a higher value.
2. Make sure that the IMM Ethernet
over USB interface is enabled.
3.
Reinstall the RNDIS or cdc_ether
device driver for the operating
system.
4. Disable the watchdog.
5. Check the integrity of the installed
operating system.
Appendix C. Integrated management module II (IMM2) error messages
445