IBM 7383, Инструкция по установке и обслуживанию

Страница: 429 / 488

Table 39. IMM error messages (continued)
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
If an action step is preceded by “(Trained technician only)”, that step must be performed only by a trained
technician.
806f0207-2584ffff The Processor All
CPUs or One of the
CPUs Status has
Failed with BIST
condition. Error A processor failed -
BIST condition has
occurred.
1. Make sure that the fans are
operating. There are no obstructions
to the airflow (front and rear of the
server), the air baffles are in place
and correctly installed, and the
server cover is installed and
completely closed.
2. Make sure that the heat sink for
microprocessor
n is installed
correctly.
3. (Trained technician only) Replace
microprocessor
n (see Removing a
microprocessor and heat sink and
Installing a microprocessor and heat
sink).
( n = microprocessor number)
806f0507-2584ffff The Processor All
CPUs or One of the
CPUs Status has a
Configuration
Mismatch. Error A processor
configuration
mismatch has
occurred.
1.
Check the CPU LED. See more
information about the CPU LED in
Light path diagnostics.
2.
Check for a server firmware update.
Important: Some cluster solutions
require specific code levels or
coordinated code updates. If the
device is part of a cluster solution,
verify that the latest level of code is
supported for the cluster solution
before you update the code.
3. Make sure that the installed
microprocessors are compatible
with each other (see Installing a
microprocessor and heat sink for
information about microprocessor
requirements).
4. (Trained technician only) Reseat
microprocessor
n (see Removing a
microprocessor and heat sink and
Installing a microprocessor and heat
sink).
5. (Trained technician only) Replace
microprocessor
n .
( n = microprocessor number)
Appendix C. Integrated management module II (IMM2) error messages
411