GE FQ000040, Руководство по обслуживанию

Страница: 207 / 698

GE
D
IRECTION
FQ091019, R
EVISION
2 V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 3 - System Setup 3-135
2.) Type the patient’s Last Name and ID in the appropriate fields (see Figure 3-142 ).
3.) Select the Dataflow you intend to use for this patient’s information (in this case, select Local
Archive – Int HD/eVue as shown in Figure 3-142 ).
4.) Using the soft key buttons, select CREATE PATIENT.
5.) Now start scanning. Each image you would like to store press the STORE button.
A few seconds after the Store button is pressed, images will be transferred into the remote
computer (which was previously set as the destination - refer to
Figure 3-141 on page 3-133 ).
6.) To proceed, follow to the instructions as described for "Using MPEGVue Viewer on a Remote PC"
on page 3-152 .