Exinda EXNV-10063, Руководство администратора

Страница: 541 / 623

Exinda Network Orchestrator 5 Troubleshooting | 541
Make the following selections and then click Generate TCP Dumps:
Interface Select an interface to run the TCP dump on. Select ALL to capture packets on all (link up) interfaces.
Note When ALL is selected for the Interface, only those interfaces which are link up will be included.
Timeout Select the amount of time for which the TCP Dump will run.
Filter Set a filter if required. Refer to the Common User Case examples below for specific filters to use in common
circumstances.
Status Shows the status of a running TCP Dump
Common Use Cases
The following examples provide the syntax to enter in the Filter field to gather data from a particular source.
To collect traffic to/from a single host
host <IP address>
Example:
host 1.2.3.4
To collect traffic from a single host who is the source of the traffic
src <IP address>
Example:
src 1.2.3.4
To collect traffic from a single host who is the destination for the traffic
dst <IP address>
Example:
dst 1.2.3.4
To collect traffic between two hosts
host <IP address 1> and host <IP address 2>
Example
host 1.2.3.4 and host 5.6.7.8
To collect traffic to / from a subnet
net <IP subnet>
Example:
net 1.2.3.0/24
To collect traffic between two subnets
src net <IP subnet> and dst net <IP subnet>
Example:
src net 1.2.3.0/24 and dst net 1.2.4.0/24