EURA SD20-G Series, Руководство пользователя

Страница: 41 / 353

SD20-G Series
41
3.2 Servo motor installation
3.2.1 Installation location
1. Install the servo motor in an environment free from corrosive or inflammable gases or combustibles, such as
hydrogen sulfide, chlorine, anmonia, sulphur gas, chloridize gas, acid, soda and salt.
2. Select and use the servo motor with oil seal in a place with grinding fluid, oil spray, iron powder or cuttings.
3. Install the servo motor away from heat sources such as heating stove.
4. Never use the servo motor in an enclosed environment. Working in the enclosed environment will lead to high
temperature of the servo motor, which will shorten its service lift.
3.2.2 Installation conditions
Environment
conditions
Equipment location Prevent tangy caustic gases and flammable gases
Altitude 1000m or below
Atmospheric pressure 86kPa~106kPa
Operating temperature -15°C~40°C
（
no freezing
）
Storage temperature -20~80°C
Humidity Below 90% (no water-bead coagulation)
Vibration Strength Below 0.5G
（
4.9m/s2
）
,10~60Hz (Discontinuous)
IP rating IP64