EURA SD20-G Series, Руководство пользователя

Страница: 12 / 353

SD20-G Series
12
EURA DRIVES ELECTRIC CO., LTD
MODEL
INPUT
AC 3PH 220V 50/60Hz
OUTPUT
3PH
4.5A 0~220V
Model Name
Capacity
Specification
Output
Specification
Barcode
0~400Hz
SD20-G102T2M2 OPTION F0D20B3
AC
MATCHED
MOTOR
SMSA-102F33ED
BAR CODE
SW NO. 1.04
BS NO. 2.001 Made in China
Fig 2.1.2 Servo Drive nameplate
2.1.2 Connection to Peripheral Devices
Panel operator
Each part name of Servo drive
Serial communication port(CN1)
Encoder interface (CN2)
I/O signal terminal (CN3)
Signal terminals such as command input, monitor output etc.
Refer to 4.3- I/O signal wiring
Charge indicator
Light on when connecting main circuit power.
Light will keep on for a while after cutting off
the power, because there still is residual voltage
in the capacitance of main circuit.
Do not touch the power terminal to avoid electric
shock when light on.
Main-circuit power input terminal
AC input terminal of main circuit power supply.
Refer to 4.1- Main circuit wiring
Control power input terminal
AC input terminal of control power supply.
Refer to 4.1- Main circuit wiring
Servo motor terminal
Connected to the driving cable of servo motor.
Refer to 4.4.2-Main circuit wiring.
Braking resistor terminal
Built-in or external braking terminals.
Refer to 7.1.7-Energy-loss brake
Ground terminal
Ground connection of servo motor and servo drive.
Make sure to earthed to avoid electric shock.
DC choke terminal
Terminal connected to DC choke.
Refer to 4.1-Main circuit wiring
Used to serial communicate with PC, PLC, CNC etc.
Refer to 6.2-Communication specification
Connected with encoder of servo motor.
Refer to 4.2-encoder wiring
S-ON RUN ALM
Consist of 5 digital tube, 4 pressing keys and 2 LED.
It is used to set control parameter, display the status
of servo drive and operational monitoring etc.
Refer to 5.1- Operation instruction
Fig 2.1.3 Connection to Peripheral Devices