SD20-G Series
151
P1
P8
P4
Internal register position selection SD0
10
20
-10
SON-I
Enable signal input
Absolute move
P1=10 pulses
P4=20 pulses
P8=-10 pulses
Position
Internal register position selection SD1
Internal register position selection SD2
Internal register position trigger CTRG
The Position command can be inhibited at any time by input contact signal HOLD.
Once HOLD is initiated the motor will decelerate and stop. As soon as the input contact CTRG is triggered again
the original position command will be completed. Diagram below shows HOLD function with incremental move.
P
1
P8
P8
-10
Relative move
Note: motor will go on rotating
to finish the former pulse
P1=20 pulses
P8=-10 pulses
Position
10
20
SON-I
Enable signal input
Internal register position selection SD0
Internal register position selection SD1
Internal register position selection SD2
Internal register position trigger CTRG
Internal register position hold signal HOLD
If the clear signal input is activated when a position command is in process then the motor will stop
Содержание SD20-G Series
