SD20-G Series
119
Zero drift: when analog input voltage is 0, zero drift is relative value between servo drive sampling voltage
and reference terminal.
Command source is acquired from servo drive terminal.
Automatic zero set: servo drive can compensate zero drift according to sample value.
Take AI1 as example, following instruction is step to set analog voltage speed.
Start
Set Po001
Po428=0
Over
Set control mode
Set analog speed source
Zero drift
correction
Set Po402 manually or set
zero automatically by
analog channel(Po406)
Set speed
command
corresponding
to ±10V
Set speed(Po400)
corresponding to ±
10V or set Po430-Po433
according to request
b)Related parameter
Parameter
Remarks
Po001
d □ 3
Control mode seletion: analog speed mode
（
1
）
Analog speed mode setting
Po428
Analog speed mode setting
Speed Torque
Setting range
Setting unit
Mfr’s value
When enabled
0~1
N/A
0
Effective Immediate
Setting value
Content
0
Analog command is set by AI1.
1
Analog command is set by AI2
（
2
）
Setting relation between analog and speed
Po400
Max speed corresponding to analog voltage
speed
Setting range
Setting unit
Mfr’s value
When enabled
Содержание SD20-G Series
