Delta ASDA-A3 Series, Руководство пользователя

Страница: 792 / 845

ASDA-A3 Troubleshooting
13-47
13
AL521 Vibration elimination parameter error
Trigger condition
and cause
Condition: the input value for the vibration elimination parameter is not appropriate.
Cause:
1.
Your input value for the vibration elimination parameter is not appropriate.
2.
The Bode plot is in error due to other variables while the operation system is
analyzing the program.
Checking method
and corrective action
Perform system analysis again and correctly set the value for the vibration
elimination parameter.
How to clear the
alarm?
1.
Perform system analysis again and correctly set the value for the vibration
elimination parameter.
2.
If the issue persists, disable the vibration elimination function P2.094 [Bit 8] &
[Bit 9].
AL555 System failure
Trigger condition
and cause
Servo drive DSP is in error.
Checking method
and corrective action
If this alarm occurs, send your servo drive directly back to Delta without making
any modification.
How to clear the
alarm?
N/A
AL809 PR arithmetic operation error or secondary platform error
Trigger condition
and cause
Condition: an error occurs when the servo drive decodes the motion command.
Cause:
The PR arithmetic operation must be compiled by the ASDA-Soft software before
downloading to the servo drive. Directly editing or modifying the PR arithmetic
operation parameters through the panel or controller without compiling by
ASDA-Soft triggers AL809.
Checking method
and corrective action
1.
Make sure you edit the PR arithmetic operation parameters through ASDA-Soft.
Do not directly modify these parameters on the panel or controller.
2.
If this alarm occurs when the servo is not in the PR mode, save the parameter
file and contact the distributor.
3.
For advanced users: save the scope screenshot when the alarm occurs.
Set P5.007 and P0.001 for the two channels and save the scope.
How to clear the
alarm?
Cycle power on the servo drive.