Description
The in-bottom/out-back cooling kit is designed for the specific
VLT
®
HVAC Drive FC 102, VLT
®
AQUA Drive FC 202, and VLT
®
AutomationDrive FC 302 D4h-size VLT
®
Parallel Drive Modules
mounted in a Rittal TS8 enclosure. The kit directs air in from
the bottom of the unit and out through the back of the unit.
See
Illustration 1.1
.
1
Top plate
2
Drive module
3
Lower duct assembly
4
Back-channel airflow (intake)
5
Back-channel airflow (exhaust)
6
Mounting backplate
Illustration 1.1 Direction of Airflow with the Kit Installed
Kit Part Number
Part number
Kit description
176F6492
In-bottom/Out-back Cooling Kit for the VLT
®
Parallel
Drive Modules (2-drive system)
Table 1.1 Part Number for the VLT
®
Parallel Drive Modules
In-bottom/Out-back Cooling Kit
Items Supplied
Top plate assembly
•
Top cover (1)
•
Gasket, top cover (1)
•
Gasket, cut out (1)
•
Screws, M5x12 (11)
Enclosure mounting assembly
•
Base mounting plate, 38 mm (1.5 in.) (2)
•
Gasket, base mounting plate (2)
•
Gasket, frequency converter exhaust vent (1)
•
Screws, M5x12 (8)
•
Nuts, M5 (6)
•
Gasket, enclosure exhaust vent (1)
•
Torx screws, M5x12 (14)
Installation Instructions
In-bottom/Out-back Cooling Kit for VLT®
Parallel Drive Modules
VLT® Series FC 102, FC 202, and FC 302
Danfoss A/S © 04/2016 All rights reserved.
MI92L102
