Delta ASDA-A3 Series, Руководство пользователя

Страница: 386 / 845

ASDA-A3 Parameters
8-13
8
 X: MON2
 Y: MON1
 UZ: reserved
MON1 and MON2
value
Description
MON1 and MON2
value
Description
0
Motor speed (+/- 8 volts /
Maximum speed)
4
Torque command (+/- 8 volts /
Maximum Torque command)
1
Motor torque (+/- 8 volts /
Maximum torque)
5 VBUS voltage (+/- 8 volts / 450V)
2
Pulse command frequency
(+8 volts / 4.5 Mpps)
6
Analog output voltage is the set
value of P1.101
3
Speed command (+/- 8 volts /
Maximum Speed command)
7
Analog output voltage is the set
value of P1.102
Note: refer to P1.004 and P1.005 for the proportional setting for the analog output voltage.
For example: when you set P0.003 to 01 (MON1 is the analog output of motor speed; MON2 is the analog
output of motor torque):
MON1 output voltage =
8 x
Motor speed
(Maximum speed x
P1.004
100
)
(Unit: volts)
MON2 output voltage =
8 x
Motor torque
(Maximum torque x
P1.005
100
)
(Unit: volts)
P0.004 -
P0.007
Reserved
P0.008
★
Total servo drive operation time
Address: 0010H
0011H
Default: 0 Control mode: All
Unit:
hour
Setting range: 0x00000000 - 0xFFFFFFFF
Format: HEX Data size: 32-bit
Settings:
Displays the total servo drive operation and Servo On time. The unit is in hours and durations of less
than 1 hour are not recorded. The recorded hours are saved when the servo power is off.
D C B A
U Z Y X
DCBA Servo On time UZYX Servo power applied time
h High bit L Low bit
P0.009
★
■ Status monitoring register 1
Address: 0012H
0013H
Default:
-
Control mode: All
Unit:
-
Setting range: -
Format: DEC Data size: 32-bit