Delta ASDA-A3 Series, Руководство пользователя

Страница: 464 / 845

ASDA-A3 Parameters
8-91
8
P2.071 ■ Absolute position homing
Address: 028EH
028FH
Default: 0x0 Control mode: All
Unit:
-
Setting range: 0 - 1
Format: HEX Data size: 16-bit
Settings:
When P2.071 is 1, the current absolute position of the encoder is the home position.
Clearing this function is enabled by setting P2.008 to 271 and P2.069.X to 1.
P2.072 Reserved
P2.073 E-Cam phase alignment - operation
Address: 0292H
0293H
Default: 0x00000000 Control mode: PR
Unit:
-
Setting range: 0x00000000 - 0x5F3F6F5F
Format: HEX Data size: 32-bit
Settings:
B C D A
YX UZ
BA PR number YX Range of filter (0 - 95%)
DC Masking range (0 - 95%) UZ Maximum allowable correction rate (0 - 100%)
h High bit L Low bit
 YX: range of filter (0 - 95%)
When DI.ALGN is triggered, the E-Cam phase alignment function is enabled. The system detects
the current E-Cam position. When the difference between the current E-Cam position and its
previous alignment position is less than the parameter's range as a percentage, the filter function
is enabled. Otherwise, the system uses the new position to do the alignment.
YX Description
00 Filter disabled
01 - 5F If | Error | ≤ (1 - YX)%, then the filter is enabled
Note: using the filter allows the alignment to be more stable and reduces any position errors caused by DI
noise, so the operation can be smoother.
 UZ: maximum allowable correction rate (0 - 100%)
When phase alignment is enabled, the limitation of the maximum allowable correction rate (C) is
defined as
｜
C
｜
≤ (P5.084/P5.083) x P2.073.UZ %
Note: when the alignment error is too large, correcting this error once may cause motor vibration or
overloading. Using this parameter can divide the phase alignment into several stages to smooth the
process, but it may need more time to complete the phase alignment.