Dell Networking S4810, Справочное руководство

Страница: 984 / 1761

Usage
Information
The running router sets the remaining time value to the current adjacency hold
time. You can override this setting by implementing this command.
Override the default restart-wait time by entering the
no graceful-restart
restart-wait
command. When you disable
restart-wait
, the current
adjacency hold time is used.
Set the t3 timer to
adjacency
on the restarting router when implementing this
command. The restarting router gets the remaining time value from its peer and
adjusts its T3 value so only when you have configured
graceful-restart t3
adjacency
.
Related
Commands graceful-restart restart-wait — enables the graceful restart maximum wait time
before a restarting peer comes up.
hello padding
Use to turn ON or OFF padding for LAN and point-to-point hello PDUs or to selectively turn padding ON
or OFF for LAN or point-to-point hello PDUs.
S4810
Syntax
hello padding [multi-point | point-to-point]
To return to the default, use the
no hello padding [multi-point | point-
to-point]
command.
Parameters
multi-point (OPTIONAL) Enter the keywords
multi-point
to pad only
LAN hello PDUs.
point-to-point (OPTIONAL) Enter the keywords
point-to-point
to pad
only point-to-point PDUs.
Defaults Both LAN and point-to-point hello PDUs are padded.
Command
Modes ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
984
Intermediate System to Intermediate System (IS-IS)