manualshive.com logo in svg

Dell Networking S4810, Справочное руководство, Страница: 114 / 1761

Поделиться
Скачать
Dell Networking S4810 Скачать руководство пользователя страница 114

Version 9.4.
(0.0)

Introduced on the S-Series and Z-Series.

Usage 
Information

You can enable the TELNET server on either a management VRF or a user defined 
VRF but not both. If you do not specify a VRF, then the TELNET server is enabled on 
the default VRF.

Example

FTOS(conf)#ip telnet server vrf vrf1 

FTOS(conf)#no ip telnet server vrf 

FTOS(conf)#ip telnet server vrf management 

FTOS(conf)#no ip telnet server vrf 

ip telnet source-interface

Set an interface’s IP address as the source address in outgoing packets for Telnet sessions.

S4810 

Syntax

ip telnet source-interface 

interface

To return to the default setting, use the 

no ip telnet source-interface 

[

interface

]

 command.

Parameters

interface

Enter the following keywords and slot/port or number 
information:

• For Loopback interfaces, enter the keyword 

loopback 

then a number from zero (0) to 16383.

• For a Port Channel, enter the keyword 

port-channel 

then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

• For VLAN interface, enter the keyword 

vlan

 then a 

number from 1 to 4094.

• For a tunnel interface, enter the keyword 

tunnel

.

Defaults

The IP address on the system that is closest to the Telnet address is used in the 
outgoing packets.

Command 
Modes

CONFIGURATION

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

114

Control and Monitoring

Содержание Networking S4810


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов