Dell Networking S4810, Справочное руководство

Страница: 1227 / 1761

• The display output is sorted by prefixes; intra-area ECMP routes are not
displayed together.
• For Type 2 external routes, Type 1 cost is not displayed.
NOTE: Starting with Version 9.4(0.0), the loopback IP address advertised to the
neighbor is not displayed in the output because they are not accounted as
inactive OSPF routes, whereas the loopback IP address is displayed until Dell
Networking OS Version 9.3(0.0). Starting with Version 9.4(0.0), the show ip
ospf routes command displays the interface and area ID information of
connected networks in addition to the other settings, whereas these details
are not displayed until Dell Networking OS Version 9.3(0.0). Starting with
Version 9.4(0.0), the metric of E2 routes in the output is displayed as an
external metric, whereas until Dell Networking OS Version 9.3(0.0), the
number of hops to the ASBR for E2 routes are displayed in the output.
Example
Dell#show ip ospf 100 route
Prefix Cost Nexthop Interface Area Type
1.1.1.1 1 0.0.0.0 Lo 0 0 Intra-Area
3.3.3.3 2 13.0.0.3 Gi 0/47 1 Intra-Area
13.0.0.0 1 0.0.0.0 Gi 0/47 0 Intra-Area
150.150.150.0 2 13.0.0.3 Gi 0/47 - External
172.30.1.0 2 13.0.0.3 Gi 0/47 1 Intra-Area
Dell#
show ip ospf statistics
Display OSPF statistics.
S4810
Syntax
show ip ospf [ process-id | vrf vrf-name ] statistics global |
[interface name {neighbor router-id }]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
vrf vrf-name Enter the keyword
vrf
followed by the name of the VRF to
display statistics corresponding to the OSPF process that is
tied to a specific VRF.
global Enter the keyword
global
to display the packet counts
received on all running OSPF interfaces and packet counts
OSPF neighbors receive and transmit.
interface name (OPTIONAL) Enter the keyword
interface
then one of the
following interface keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
Open Shortest Path First (OSPFv2 and OSPFv3)
1227