Dell Networking S4810, Справочное руководство

Страница: 1511 / 1761

ip ssh hostbased-authentication
Enable hostbased-authentication for the SSHv2 server.
S4810
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the
no ip ssh
hostbased-authentication enable
command.
Parameters
enable Enter the keyword
enable
to enable hostbased-
authentication for SSHv2 server.
Defaults Disabled.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information
If you enable this command, clients can log in without a password prompt. This
command provides two levels of authentication:
• rhost-authentication is done with the file specified in the
ip ssh rhostfile
command.
• checking client host-keys is done with the file specified in the
ip ssh pub-
key-file
command.
NOTE: Administrators must specify the two files (
rhosts
and
pub-key-file
)
to configure host-based authentication.
Related
Commands
ip ssh pub-key-file — public keys of trusted hosts from a file.
Security
1511