Dell Networking S4810, Справочное руководство

Страница: 1457 / 1761

local Use the authorization parameters on the system to perform
authorization.
Use the protocol to perform authorization.
none Enter the keyword
none
to apply no authorization.
Defaults none
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Added support for RADIUS.
privilege level (CONFIGURATION mode)
Change the access or privilege level of one or more commands.
S4810
Syntax
privilege mode {level level command | reset command }
To delete access to a level and command, use the
no privilege mode level
level command
command.
Parameters
mode Enter one of the following keywords as the mode for which
you are controlling access:
•
configure
for CONFIGURATION mode
•
exec
for EXEC mode
•
interface
for INTERFACE modes
•
line
for LINE mode
•
route-map
for ROUTE-MAP mode
•
router
for ROUTER OSPF, ROUTER RIP, ROUTER ISIS
and ROUTER BGP modes
Security
1457