Dell Networking S4810, Справочное руководство

Страница: 1147 / 1761

Related
Commands ip pim sparse-mode — enables IGMP and PIM on an interface.
show ip mroute
View the multicast routing table.
S4810
Syntax
show ip mroute [static | group-address [ source-address ] | count
| snooping [vlan vlan-id ] [ group-address [ source-address ]] |
summary | vlt [ group-address [ source-address ] | count]
Parameters
static (OPTIONAL) Enter the keyword
static
to view static
multicast routes.
group-address
[ source-
address ]
(OPTIONAL) Enter the multicast group-address to view only
routes associated with that group.
Enter the source-address to view routes with that group-
address and source-address.
count (OPTIONAL) Enter the keyword
count
to view the number of
multicast routes and packets.
snooping [vlan
vlan-id ]
[ group-address
[ source-
address ]]
Enter the keyword
snooping
to display information on the
multicast routes PIM-SM snooping discovers.
Enter a VLAN ID to limit the information displayed to the
multicast routes PIM-SM snooping discovers on a specified
VLAN. The VLAN ID range is from 1 to 4094.
Enter a multicast group address and, optionally, a source
multicast address in dotted decimal format (A.B.C.D) to limit
the information displayed to the multicast routes PIM-SM
snooping discovers for a specified multicast group and
source.
summary (OPTIONAL) Enter the keyword
summary
to view a summary
of all routes.
vlt (OPTIONAL) Enter the keyword
vlt
to view multicast routes
with a spanned incoming interface. Enter a multicast group
address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes for a specified
multicast group and optionally a source multicast address in
dotted decimal format (A.B.C.D) to limit the information
displayed for a specified multicast source. Enter the keyword
count
to display the total number of multicast routes with
the spanned IIF.
Multicast
1147