Dell Networking S4810, Справочное руководство, Страница: 994 / 1761

Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.5.1.0 Introduced on the E-Series.
Usage
Information
Dell Networking recommends configuring metrics on all interfaces. Without
configuring this command, the IS-IS metrics are similar to hop-count metrics.
isis metric
Assign a metric to an interface.
S4810
Syntax
isis metric default-metric [level-1 | level-2]
To return to the default values, use the
no isis metric [ default-metric ]
[level-1 | level-2]
command.
Parameters
default-metric Metric assigned to the link and used to calculate the cost
from each other router via the links in the network to other
destinations. You can configure this metric for Level 1 or
Level 2 routing. The range is from 0 to 63 for narrow and
transition metric styles and from 0 to 16777215 for wide
metric styles. The default is
10 .
level-1 (OPTIONAL) Enter the keywords
level-1
to configure the
shortest path first (SPF) calculation for Level 1 (intra-area)
routing. This setting is the default.
level-2 (OPTIONAL) Enter the keywords
level-2
to configure the
SPF calculation for Level 2 (inter-area) routing.
Defaults default-metric = 10 ; level-1 (if not otherwise specified)
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
994
Intermediate System to Intermediate System (IS-IS)