Dell Networking S4810, Справочное руководство

Страница: 365 / 1761

Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
bfd interval
Specify non-default BFD session parameters beginning with the transmission interval.
S4810
Syntax
bfd interval interval min_rx min_rx multiplier value role
{active | passive}
Parameters
interval
milliseconds
Enter the keywords
interval
to specify non-default BFD
session parameters beginning with the transmission interval.
The range is from 50 to 1000. The default is
100 .
min_rx
milliseconds
Enter the keywords
min_rx
to specify the minimum rate at
which the local system would like to receive control packets
from the remote system. The range is from 50 to 1000. The
default is
100 .
multiplier value Enter the keywords
multiplier
to specify the number of
packets that must be missed in order to declare a session
down. The range is from 3 to 50. The default is
3 .
role [active |
passive] Enter the role that the local system assumes:
•
Active
— The active system initiates the BFD session.
Both systems can be active for the same session.
•
Passive
— The passive system does not initiate a
session. It only responds to a request for session
initialization from the active system.
The default is Active .
Defaults Refer to Parameters .
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0 Introduced on the S4820T.
Bidirectional Forwarding Detection (BFD)
365