Dell Networking S4810, Справочное руководство

Страница: 1173 / 1761

To remove a filter, use the
no distribute-list prefix-list-name out
[bgp | connected | isis | rip | static]
command.
Parameters
prefix-list-
name Enter the name of a configured prefix list.
bgp (OPTIONAL) Enter the keyword
bgp
to specify that BGP
routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
connected (OPTIONAL) Enter the keyword
connected
to specify that
connected routes are distributed.
isis (OPTIONAL) Enter the keyword
isis
to specify that IS-IS
routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
rip (OPTIONAL) Enter the keyword
rip
to specify that RIP
routes are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
static (OPTIONAL) Enter the keyword
static
to specify that only
manually configured routes are distributed.
Defaults Not configured.
Command
Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)
1173