Dell Networking S4810, Справочное руководство

Страница: 890 / 1761

• Enter the keyword
ecmp-group detail
to view the
ECMP group index.
ecmp-group
{detail |
member-info
[detail [group-
index
index-
number ]]}
(OPTIONAL) Enter the keyword
ecmp-group
then one of the
following keywords to filter results.
• Enter the keyword
detail
to view the ECMP group
index.
• Enter the keyword
member-info
to view the member
information for the ECMP group.
• Enter the keyword
member-info detail
to view
detailed ECMP membership and n-hop information.
• Enter the keyword
group-index
then the index number
to show ECMP membership per group. The range is from
0 to 1022.
summary (OPTIONAL) Enter the keyword
summary
to view a table
listing route prefixes and the total number routes which can
be entered in to CAM.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Added support for up to seven stack members.
Version 7.6.1.0 Introduced on the S-Series.
Usage
Information The following describes the
show ip cam
command shown in the following
example.
Field Description
Destination Displays the destination route of the index.
EC Displays the number of equal cost multipaths (ECMP)
available for the default route for non-Jumbo line cards. For
Jumbo line cards, displays 0,1 when ECMP is more than
eight.
CG Displays 0.
890
IPv4 Routing