Dell Networking S4810, Справочное руководство, Страница: 804 / 1761

all Configure all applications.
Defaults None.
Command
Modes EIS Mode (conf-mgmt-eis)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.2.
(0.0) Introduced on the Z9000, S4810, and S4820T.
application (for HTTP and ICMP)
Configure the management egress interface selection for HTTP and ICMP.
NOTE: Only the options that have been newly introduced are described here. For a complete
description on all of the keywords and variables that are available with this command, refer the
respective Command Reference Guide of the applicable platform of the Release 9.2(0.0)
documentation set.
S4810
Syntax
application {all | application-type }
To remove a management application configuration, use the
no application
{all | application-type }
command.
Parameters
application-
type Enter any of the following keywords:
• For HTTP, enter the keyword
http
.
• For ICMP, enter the keyword
icmp
.
all Configure all applications.
Defaults None.
Command
Modes EIS Mode (conf-mgmt-eis)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.3.
(0.0) Added support for the HTTP and ICMP traffic on the Z9000,
S4810, and S4820T.
804
Interfaces