Dell Networking S4810, Справочное руководство, Страница: 1749 / 1761

Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information The following describes the
show vrrp brief
command shown in the following
example.
Item Description
Interface Lists the interface type, slot and port on which the VRRP
group is configured.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If the
track
command is configured to track that interface and
the interface is disabled, the cost is subtracted from the
priority value assigned to the interface.
Pre States whether preempt is enabled on the interface.
•
Y
= Preempt is enabled.
•
N
= Preempt is not enabled.
State Displays the operational state of the interface by using one
of the following:
• NA/IF (the interface is not available).
• MASTER (the interface associated with the MASTER
router).
• BACKUP (the interface associated with the BACKUP
router).
Master addr Displays the IP address of the MASTER router.
Virtual addr(s) Displays the virtual IP addresses of the VRRP routers
associated with the interface.
Example (Brief)
Dell>Interface Grp Pri Pre State Master addr Virtual addr(s)
Description----------------------------------------------------
--------
Gi 10/37 1 100 Y Master 200.200.200.200 200.200.200.201
Gi 10/37 2 100 Y Master 200.200.200.200 200.200.200.202
200.200.200.203 Description
Gi 10/37 3 100 Y Master 1.1.1.1 1.1.1.2
Gi 10/37 4 100 Y Master 200.200.200.200 200.200.200.206
Virtual Router Redundancy Protocol (VRRP)
1749