Dell Networking S4810, Справочное руководство

Страница: 457 / 1761

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0) Added support for VRF.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
To view the total number of COMMUNITY attributes found, use the
show ip bgp
summary
command. The text line above the route table states the number of
COMMUNITY attributes found.
The
show ip bgp community
command without any parameters lists BGP
routes with at least one BGP community attribute and the output is the same as for
the
show ip bgp
command output.
The following describes the
show ip bgp community
command shown in the
following example.
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then local routes exist in the routing
table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight.
Path Lists all the ASs the route passed through to reach the
destination network.
Example
Dell#show ip bgp community ?
local-AS Do not export outside local AS (well-
known community)
no-advertise Do not advertise to any peer (well-
known community)
no-export Do not export to next AS (well-known
community)
aa:nn Community number in aa:nn format
| Pipe through a command
Border Gateway Protocol
457