Dell Networking S4810, Справочное руководство, Страница: 99 / 1761

Usage
Information Users entering EXEC Privilege mode or any other configured privilege level can
access configuration commands. To protect against unauthorized access, use the
enable password
command to configure a password for the
enable
command
at a specific privilege level. If no privilege level is specified, the default is privilege
level
15 .
Related
Commands enable password — configures a password for the
enable
command and to
access a privilege level.
enable optic-info-update interval
Enable polling intervals of optical information updates for simple network management protocol (SNMP).
S4810
Syntax
enable optical-info-update interval seconds
To disable optical power information updates, use the
no enable optical-
info-update interval
command.
Parameters
interval
seconds
Enter the keyword
interval
then the polling interval in
seconds. The range is from 120 to 6000 seconds. The
default is
300 seconds (5 minutes).
Defaults Disabled
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Replacement command for the S4820T. Replaces the
enable xfp-power-updates
command.
Version 8.3.11.4 Replacement command for the Z9000. Replaces the
enable
xfp-power-updates
command
Version
8.3.10.0 Replacement command for the S4810 only. Replaces the
enable xfp-power-updates
command.
Usage
Information To enable polling and to configure the polling frequency, use this command.
Control and Monitoring
99