Dell Networking S4810, Справочное руководство, Страница: 1757 / 1761

debug vrrp ipv6
Allows you to enable debugging of VRRP.
S4810
Syntax
debug vrrp ipv6 interface [ vrid ] {all | packets | state |
timer}
Parameters
interface Enter the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a VLAN interface, enter the keyword
vlan
then the
VLAN ID. The VLAN ID range is from 1 to 4094.
vrid (OPTIONAL) Enter a number from 1 to 255 as the VRRP
group ID.
all Enter the keyword
all
to enable debugging of all VRRP
groups.
bfd Enter the keyword
bfd
to enable debugging of all VFFP BFD
interactions.
database Enter the keyword
database
to display changes related to
group, prefix, and interface entries in the VRRP table.
packets Enter the keyword
packets
to enable debugging of VRRP
control packets.
state Enter the keyword
state
to enable debugging of VRRP state
changes
timer Enter the keyword
timer
to enable debugging of the VRRP
timer.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.10.0 Introduced on the S4810.
Virtual Router Redundancy Protocol (VRRP)
1757