Dell Networking S4810, Справочное руководство

Страница: 848 / 1761

Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.9.1.0 Introduced VRF on the E-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information
Use the
vrf vrf-name
attribute of this command to clear routes corresponding
to either a specific VRF or the default VRF.
You cannot use this attribute to clear routes corresponding to a management VRF.
Related
Commands
ip route — assigns an IP route to the switch.
show ip route — views the routing table.
show ip route summary — views a summary of the routing table.
clear tcp statistics
Clear TCP counters.
S4810
Syntax
clear tcp statistics [all | cp | rp1 | rp2]
Parameters
all Enter the keyword
all
to clear all TCP statistics maintained
on all switch processors.
cp (OPTIONAL) Enter the
cp
to clear only statistics from the
Control Processor.
rp1 (OPTIONAL) Enter the keyword
rp1
to clear only the
statistics from Route Processor 1.
rp2 (OPTIONAL) Enter the keyword
rp2
to clear only the
statistics from Route Processor 2.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
848
IPv4 Routing