Dell Networking S4810, Справочное руководство

Страница: 1073 / 1761

Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Legacy E-
Series
command.
Related
Commands
• fefd — enables far-end failure detection.
• fefd-global — enables FEFD globally on the system.
fefd-global
Enable FEFD globally on the system.
S4810
Syntax
fefd-global [interval seconds ][mode {normal | aggressive}]
To disable FEFD globally, use the
no fefd-global [mode {normal |
aggressive}]
command.
Parameters
interval
seconds
Enter the keyword
interval
followed by the number of
seconds to wait between FEFD control packets. Range is
from 3 to 300 seconds. Default is 15 seconds.
normal (OPTIONAL) Enter the keywords
mode normal
to change
the link state to “unknown” when a far-end failure the
software detects on that interface. When the interface is
placed in “unknown” state, the software brings down the line
protocol. The default is
Normal mode .
aggressive (OPTIONAL) Enter the keywords
mode aggressive
to
change the link state to “error-disabled” when a far-end
failure the software detects on that interface. When an
interface is placed in “error-disabled” state, t enter the
fefd
reset
command to reset the interface state.
Defaults Disabled.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Layer 2
1073