Dell Networking S4810, Справочное руководство, Страница: 1093 / 1761

To return to the default, use the
no advertise med guest-voice { vlan-id
layer2_priority DSCP_value } | {priority-tagged number }
command.
Parameters
vlan-id Enter the VLAN ID. The range is from 1 to 4094.
layer2_priority Enter the Layer 2 priority. The range is from 0 to 7.
DSCP_value Enter the DSCP value. The range is from 0 to 63.
priority-tagged
number
Enter the keywords
priority-tagged
followed the Layer 2
priority. The range is from 0 to 7.
Defaults Unconfigured.
Command
Modes CONFIGURATION (conf-lldp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series and E-Series.
Related
Commands
protocol lldp (Configuration) — enables LLDP globally.
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
advertise med guest-voice-signaling
To advertise a separate limited voice service for a guest user when the guest voice control packets use a
separate network policy than the voice data, configure the system.
S4810
Syntax
advertise med guest-voice-signaling { vlan-id layer2_priority
DSCP_value } | {priority-tagged number }
To return to the default, use the
no advertise med guest-voice-signaling
{ vlan-id layer2_priority DSCP_value } | {priority-tagged number }
command.
Link Layer Discovery Protocol (LLDP)
1093